EverFocus 410H - Manual (Page 33)

(10) TIME ZONE:
You can set the time zone where you locate if you connect to network and enable time
synchronize.
(11) TIME UPDATE BY:
Once you enable the TIME SYNCHRONIZE, you can select the synchronization frequency by:
DAY MONTH WEEK
(8) TIME SYNCHRONIZE:
Select “ON” or “OFF” to enable or disable time synchronize which can let you have correct time
automatically when network is connected.
(9) TIME SERVER:
You can set the time server address where you locate if you connect to network and enable time
synchronize. For checking the IP address of NTP Server, p lease follow the steps:
1. Connect your PC to the internet for searching the IP address of NTP Server.
2. Go to “START” -> “RUN” -> type “Command” and press “OK”
Under Dos Prompt, type “C:\Ping Pool.NTP.ORG to find out the IP address of NTP Server.
31