Switching the remote control settings – Eclipse - Fujitsu Ten CD8053 User Manual
Page 110
110
How to use an optional Card remote control
[SEL] button
[FUNC] button [RTN] button
[
DISC
] buttons
[
TRACK
] buttons
Switching the remote control settings
Remote control functions can be switched to the three patterns.
Press the [FUNC] button of the main unit.
1
Turn the [SEL] button to select a pattern.
4
PATTERN A: Conventional functions
PATTERN B: [DISC
] button ...............Repeat
[DISC
] button ...............Answer
[TRACK
] button............Next
[TRACK
] button............Previous
Other functions than the above are conventional functions.
PATTERN C: [DISC
] button ..............Option4
[DISC
] button ..............Option3
[TRACK
] button ...........Option2
[TRACK
] button ...........Option1
Other functions than the above are conventional functions.
The pattern is switched in the order of A, B, and C so that the
E-com function can be supported. The selected item will be
highlighted.
Turn the [SEL] button to select Remote Func.
2
The remote control function switching mode is activated.
Press the [SEL] button.
3
The selected item will be highlighted.
Press the [RTN] button.
5
Press the [FUNC] button to exit function mode.
6
At this time, other adjustments can also be made in function
mode.