Eclipse - Fujitsu Ten CD8053 - Manual (Page 31)

31
Basic operation
The receiver is set at the factory to emit a beep tone in
response to button operation. The guide tone feature may be
disabled in the following procedure:
Turn the [SEL] button to select Guide Tone.
The selected item will be highlighted.
Press the [SEL] button.
The guide tone mode will be switched ON/OFF.
Turn the [SEL] button to select ON or OFF.
The selected item will be highlighted.
Press the [RTN] button.
At this time, other adjustments can also be made in
function mode.
Press the [FUNC] button to exit function mode. 5
4
3
2
1
Disabling the guide tone feature (for button operation)
[RTN] button [FUNC] button
[SEL]
button