Eclipse - Fujitsu Ten CD8053 - Manual (Page 66)

66
How to operate the Sound Adjustment Mode
About Sound Adjustment Mode
How to operate the Sound Adjustment Mode
Normal mode Pro mode
(See page 74) Graphic equalizer
(Simplified)
(See page 79)
(See page 92) Time alignment
(See page 84) (See page 94) Crossover
(See page 96) MP3 harmonizer * 2
(See page 85) (See page 97) Non-fader phase
BASS/TREBLE * 3
(single-band * 1 )
(See page 77)
(See page 87) Parametric equalizer
This unit is equipped with two different sound adjustment modes:
normal mode and pro mode.
In normal mode, the acoustic characteristics inside the vehicle can
be adjusted using comparatively simple settings. In addition, it
corresponds to basic sound systems which comprise front speakers,
rear speakers and an added sub-woofer if necessary.
In pro mode, the sound quality characteristics can be adjusted item
by item using more sophisticated settings than in normal mode. In
addition, the adjustments can be made to suit 3-way speaker system
where the front speaker, rear speaker and non-fader output can be
set to Hi (treble range) Mid (medium range) or Low (bass range).
Refer to the table below and to the operations for each mode for
details of each mode.
* 1: In normal mode, the parametric equalizer is adjusted during EQ
mode.
* 2: Only when E-COM is connected.
* 3: Adjusted during audio control mode (see page 24).
The following adjustments can be made in normal mode and pro
mode respectively.