Eclipse - Fujitsu Ten CD8053 - Manual (Page 42)

42
How to operate the CD player
Creating a title for a CD
Press the [FUNC] button while in the disc mode. 1
Press the [SEEK ] button to select the character type. 4
Pressing the button will switch types from [ABC] (alphabet
characters) to [123] (numeric characters) and then [!&?]
(symbols).
Press either [SEL] or [FAST ] button to select the
position in which to enter the character.
5
The character will be inserted where the cursor is flashing:
[SEL] button:
Moves the cursor to the right.
[FAST ] button: Advances the cursor to the left.
A CD title may be created, attached and displayed for your discs. If
external CD changers are connected, a title for a CD will be created
in the same way. It is assumed here that the CD to be titled is
playing.
ATTENTION
No CD text disc can be set.
Turn the [SEL] button to select Title. 2
The disc title setting mode is activated.
The selected item will be highlighted.
Press the [SEL] button. 3
[SEEK ] button
[SEL]
button
[FAST ] button
[RTN] button [FUNC] button