Extreme Networks Icron WiRanger - Manual (Page 14)

8
Checking the Installation
Once the Activity LED’s on the LEX unit and REX unit stop flashing after
power up:
1. Check that the Power LED’s on the LEX unit and REX unit are
both on.
2. Check that the Link LED’s on the LEX unit and REX unit are both
on.
3. Check that the Host LED’s on the LEX unit and REX unit are both
on.
4. For Windows users (2000, XP, or Vista) open Device Manager to
confirm that the WiRanger has installed correctly. Expand the entry
for Universal Serial Bus controllers by clicking the + sign. If the
WiRanger has been installed correctly you should find it listed as a
Generic USB Hub.
NOTE : To open Device Manager in Windows 2000 or XP: Right-
click My Computer then select Properties, select the
Hardware tab and click the Device Manager button
NOTE : To open Device Manager in Windows Vista: Open the Start
menu, right-click on Computer, select Manage and finally
click on "Device Manager" in the left-hand tree
5. For Mac OS X users open the System Profiler to confirm that the
WiRanger has installed correctly. In the left hand column under
Hardware, select “USB” and inspect the right hand panel. If the
WiRanger has been installed correctly you should find it listed as a
Hub under the USB High-Speed Bus.
NOTE : To open System Profiler in OS X: Open the Finder, select
Applications, then open the Utilities folder and double click
on the System Profiler icon.
Connecting a USB Device
1. Install any software required to operate the USB device(s). Refer to
the documentation for the device(s), as required.
2. Connect the USB device(s) to the Device port(s) on the REX unit.
3. Check that the Device LED on the REX unit is on.
4. Confirm on the host PC that the each connected device operates as
expected.