Extreme Networks Icron WiRanger - Manual (Page 19)

User Guide
13
4. Wait for the LED’s on the LEX unit and the REX unit to stop
blinking and for the Link LED to turn on.
NOTE : If the Link LED does not turn on within 30 seconds return to
step 1.
5. The LEX unit and the REX unit are now Paired and are free to be
unplugged and moved to their desired locations.
6. Once the units are installed in their specific locations, connect a
USB cable between the WiRanger and the host PC to confirm the
WiRanger’s operation. If the system has been installed and paired
correctly it should be listed in Device Manager (for Windows
installations), or System Profiler (for Mac OS X installations) under
Universal Serial Bus controllers as a “Generic USB Hub”.