EPoX Computer EP-3VCA2 - Manual (Page 30)

BIOS EP-3VCA2
Page 4-4
Virus Warning: During and after the system boots up, any attempt to write to the
boot sector or partition table of the hard disk drive will halt the system and an
error message will appear.
You should then run an anti-virus program to locate the virus. Keep in mind that
this feature protects only the boot sector, not the entire hard drive.
The default value is Disabled.
Enabled: Activates automatically when the system boots up causing a warning
message to appear when anything attempts to access the boot sector.
Disabled: No warning message will appear when anything attempts to access the
boot sector.
Note: Many disk diagnostic programs that access the boot sector table
can trigger the virus warning message. If you plan to run such a
program, we recommend that you first disable the virus warning.
CPU Internal Cache: This controls the status of the processor’s internal cache
area. The default is Enabled.
Enabled: This activates the processor’s internal cache thereby increasing
performance.
Disabled: This deactivates the processor’s internal cache thereby lowering
performance.
External (L2) Cache: This controls the status of the external (L2) cache area.
The default is Enabled.
Enabled: This activates the motherboard’s L2 cache thereby increasing
performance.
Disabled: This deactivates the motherboard’s L2 cache thereby lowering
performance.
CPU L2 Cache ECC Checking: This control if the CPU’s L2 Cache will
support Error Checking and Correcting (ECC). The default is Disabled.
Enabled: Enables ECC support for the CPU’s L2 cache. Performance will
decrease 2% ~ 4%.
Disabled: Disables ECC support for the CPU’s L2 cache.
Processor Number Feature: Pentium III or later CPU new feature. The default
is Enabled.
Enabled: Processor serial number readable.
Disabled: Processor serial number disabled.