EPoX Computer EP-3VCA2 - Manual (Page 9)

Introduction EP-3VCA2
Page 1-3
Power-On/Off (Remote)
The EP-3VCA2 has a single 20-pin connector for ATX power supplies. For ATX
power supplies that support the Remote On/Off feature, this should be connected
to the systems front panel for system Power On/Off button. The systems power
On/Off button should be a momentary button that is normally open.
The EP-3VCA2 has been designed with “Soft Off" functions. You can turn Off the
system from one of two sources: The first is the front panel Power On/Off
button, and the other is the "Soft Off" function (coming from the EP-3VCA2’s
onboard circuit controller) that can be controlled by the operating system such as
Windows 95/98. System will be turn off automatically after your click the START
button and resume the Shutdown selection.
Figure 4: Simple ATX Power ON/OFF Controller
J 3
ATX
POWER SUPPLY
Case (chassis) Power
ON/OFF button (J 3)
I/O Shield Connector
The EP-3VCA2 is equipped with an I/O back panel. Please use the appropriate I/
O shield (figure 3).
Figure 3: I/O back panel layout
PS/2 Mouse
PS/2
KEYBOARD
USB port
COM1 COM2
parallel port
Speaker
Line_in
MIC
Joystick/Midi