EPoX Computer EP-3VCA2 - Manual (Page 34)

BIOS EP-3VCA2
Page 4-8
Bank 0/1, 2/3, 4/5 DRAM Timing: This value in this field is set by the system
board manufacturer, depending on whether the board has paged DRAMs or EDO
(extended data output) DRAMs.
The Choice: Bank 0/1, 2/3, 4/5.
SDRAM Cycle length: This setting defines the CAS timing parameter of the
SDRAM in terms of clocks. The default is 3.
2: Provides faster memory performance.
3: Provides better memory compatibility.
Bank Interleave: The item allows you to set how many banks of SDRAM support
in your mainboard.
The Choice: 2 Bank, 4 Bank, Disabled.
4-3 Advanced Chipset Features
Choose the “CHIPSET FEATURES SETUP” in the CMOS SETUP UTILITY menu
to display following menu.
Figure 4: Chipset Features Setup