Enterasys Networks BRIM-E6 - Manual (Page 10)

BRIM-E6 SPECIFICATIONS
BRIM-E6 USER’S GUIDE Page 3
EPIM Connectivity
EPIMs allow you to configure the BRIM-E6 to support a variety of media
types. Cabletron Systems offers the EPIMs shown in Table 1-1.
1.5 BRIM-E6 SPECIFICATIONS
The operating specifications for the BRIM-E6 are described in this
section. Cabletron Systems reserves the right to change these
specifications at any time without notice.
Environmental Requirements
Operating Temperature: -5
°
to +40
°
C
Non-operating Temperature: -30
°
to +90
°
C
Operating Humidity: 5 to 95% (non-condensing)
Safety and Approvals
This unit meets the safety requirements of UL 1950, CSA C22.2 NO 950,
and EN 60950; the EMI requirements of FCC Class A and EN 55022
Class A; and the EMC requirements of EN 50082-1.
Table 1-1. EPIMs
EPIM MEDIA TYPE CONNECTOR
EPIM-A AUI DB15 (Female)
EPIM-C 10BASE-2 Thin Coaxial BNC
EPIM-T 10BASE-T Unshielded
Twisted Pair RJ45
EPIM-X Standard Transceiver DB15 (Male)
EPIM-F1 Multimode Fiber SMA
EPIM-F2 Multimode Fiber ST
EPIM-F3 Single Mode Fiber ST