Mac os x users, P. 13) – Edirol MA-1EX User Manual

Page 13

Advertising
background image

13

Getting Connected and Installing Drivers English

Mac OS X Users

*

If a “

Authenticate

” dialog box appears during

the installation, enter the password and click
[

OK

].

*

The contents of the display may differ
depending on your system.

*

Operation may become unstable if you start
up your Macintosh with the MA-1EX
connected. If this occurs, start up your
Macintosh with the MA-1EX disconnected,
and then connect the MA-1EX.

1.

With the MA-1EX disconnected, start up
the Macintosh.
Disconnect all USB cables except for a
USB keyboard and USB mouse (if used).

2.

Exit all currently running software
(applications).
If you are using virus checking or similar
software, be sure to exit it as well.

3.

Use the USB cable to
connect the MA-1EX to
your Macintosh, and
turn on the MA-1EX’s
power (turn the
VOLUME knob toward the right).

This unit is equipped with a protection circuit.
A brief interval (a few seconds) after
connecting a USB connector is required before
the unit will operate normally.

4.

Open the

System Preference

dialog box

and click

Sound

.

5.

In the

Sound Effects

tab, click

Play

alerts and sound effects through

and

choose

USB Audio

as the playback

device for sound effects.

If no sound is output from the speaker (internal
speaker) of the Macintosh, choose

“Built-in

audio controller”

in the Output tab.

6.

Click the

Output

tab, and choose

USB

Audio

as the device that will output

sound.

Known issues: MA-1EX

Caution
Please check the following before you use
your software.
• If your software allows you to make

audio output settings, choose USB
Audio

. For details, refer to the

owner’s manual of the software you
are using.

• Use the USB cable to connect the MA-

1EX to your computer before you start
up your software.

• Do not disconnect the MA-1EX’s USB

cable while your software is running.

• Exit your software before you

disconnect the MA-1EX’s USB cable.

• The MA-1EX will not operate in the

Mac OS X Classic environment. You
can not use it if the Classic
environment is running.

MA-1EX_efgis.book 13 ページ 2005年10月31日 月曜日 午後2時30分

Advertising