Epson LABELWRITER SE450 - Manual (Page 19)

Command Reference
This chapter describes the commands you can use to program your LabelWriter SE450
printer. Below are some of the things you can do with the commands:
n
Send line feeds and carriage returns
n
Define barcode size and position
n
Read firmware revision and printer status information
n Define label size, and paper orientation
n
Print graphics in inverse text mode and print enlarged characters
See the pages that follow for listings of commands arranged alphabetically and by function.
Alphabetical Command List
NAME DESCRIPTION
CR Carriage Return
DC4 Cancel Double Wide Mode
ESC * Reset to Defaults
ESC @ Reset to Power-up Condition
ESC A Return Printer Status
ESC a Return Hardware Status
ESC B Set Dot Tab
ESC c Set Print Temperature to Low
ESC D Set Bytes per Line
ESC d Set Print Temperature to Medium
ESC E Form Feed
ESC e Set Print Temperature to Default
ESC F 1 n Feed n Lines
13
Chapter 4