Epson LABELWRITER SE450 - Manual (Page 30)

Command Reference
ASCII ESC J n
Decimal 27 74 n
Hex 1B 4A n
Parameters
n = the desired number of sublines to feed
ESC L Set Feed Length
Description
Provided for LabelWriter raster compatibility.
See the GS L command for information.
See Also
GS L
ESC M Set Font to 12 cpi
Description
Changes to the 12 cpi normal font. The cell dimension is 32 H x 16 W. This is the
default font.
Fonts may only be changed at the beginning of a line, prior to any printable characters.
This font will remain in effect until the printer is reset (by the ESC @ or ESC *
command) or another font is selected.
See Also
ESC P
ESC S
ESC T
ESC U
Expression
ASCII ESC M
Decimal 27 77
Hex 1B 4D
Parameters
None
Font Height Width
Horizontal
cpi
Vertical cpi
ESC S 16 10 20.3 12.7
24