Esc u set font to 10 cpi, Esc u – Epson LABELWRITER SE450 User Manual
Page 33
Advertising
Commands
Fonts may only be changed at the beginning of a line, prior to any printable characters.
This font will remain in effect until the printer is reset (by the ESC @ or ESC *
command) or another font is selected.
See Also
Expression
ASCII
ESC T
Decimal
27 84
Hex
1B 54
Parameters
None
Example
Font
Height
Width
Horizontal
cpi
Vertical cpi
ESC S
16
10
20.3
12.7
ESC P
24
12
16.9
8.4
ESC M
32
16
12.7
6.4
ESC U
32
20
10.2
6.4
ESC T
56
28
7.3
3.6
ESC U Set Font to 10 cpi
Description
Changes to the 10 cpi headline font. The cell dimension is 32 H x 20 W.
Fonts may only be changed at the beginning of a line, prior to any printable characters.
This font will remain in effect until the printer is reset (by the ESC @ or ESC *
command) or another font is selected.
See Also
27
Advertising