Turning off the projector – Eiki LC-XB30 User Manual

Page 21

Advertising
background image

21

Basic Operation

Basic Oper

ation

Press the POWER ON-OFF button on the top control or on
the remote control, and a message "Power off?" appears on
the screen.

Press the POWER ON-OFF button again to turn off the
projector. The POWER indicator starts to blink red, and it
continues while the cooling fans are operating for about 90
seconds. (About 120 seconds when the fan mode is L2. See
page 48.)

1

2

TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN
PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE
TURNING IT OFF.
DO NOT DISCONNECT AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE POWER
INDICATOR EMITS RED LIGHT. OTHERWISE IT WILL
RESULT IN SHORTENING LAMP LIFE.

3

When the projector has cooled down enough to be turned on
again, the POWER indicator emits red light. Then you can
disconnect the AC power cord.

The message disappears after 4 seconds.

Note:

• The projector cannot be turned on during the cooling period with the POWER

indicator blinking red. You can turn it on again after the POWER indicator emits red
light.

• When the On start function is on, this projector is turned on automatically by

connecting the AC power cord to an AC outlet. (See page 45 for the On start
function.)

• Do not operate the projector continuously without rest. Continuous use may result

in shortening the lamp life. Turn off the projector and give it a rest about an hour in
every 24 hours.

• This projector monitors internal temperature and automatically controls the

running speed of the cooling fans.

• If the WARNING indicator blinks or emits red light, see “Warning Indicator” on page

49.

Turning Off the Projector

Advertising