Eiki LC-XB30 - Manual (Page 24)

24
Basic Operation
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Ring to adjust the projected picture focus.
Zoom Lever
Focus Ring
Auto Setup Function
Auto setup function is provided to automatically correct Keystone
distortion according to the projector's tilt and adjust the computer
display parameters (Fine sync, Total dots and Picture position) by
just pressing the AUTO SETUP button on the top control or the
AUTO SET button on the remote control. The operational Setup for
the Auto setup can be changed in the Setting menu.
Refer to p42 on setting of the Auto setup function.
✔
Note:.
• Auto keystone corrects vertical distortion only, not correct horizontal distortion.
p44)2.478.