Eiki LC-XB30 - Manual (Page 30)

30
Computer Input
Press the MENU button and the On-Screen Menu will
appear. Press the Point
7 8 buttons to move the red frame
pointer to the PC Adjust Menu icon.
1
2 Press the Point d d button to move the red frame pointer to
the item that you want to adjust and then press the SELECT
button. An adjustment dialog box will appear. Press the
Point
7 8 buttons to adjust value.
Move the red frame pointer to
an item and press the SELECT
button.
PC Adjust Menu
PC Adjust Menu icon
Eliminate the flicker from the image displayed. Press the Point 7
8 buttons to adjust value. (From 0 to 31)
Fine sync
Adjust the number of total dots in one horizontal period. Press the
Point
7 8 buttons and adjust number to match your PC image.
Total dots
Adjust horizontal picture position. Press the Point 7 8 buttons to
adjust the position.
Horizontal
Adjust vertical picture position. Press the Point 7 8 buttons to
adjust the position.
Vertical
Press the SELECT button to show H-Sync freq. and V-Sync freq. of
the connected computer.
Current mode
Adjust the clamp level. When the image has dark bars, try this
adjustment.
Clamp
Press the SELECT button at
this icon to adjust the other
items.
Press the Point 7 8 buttons to
adjust the value.
Show the status
(Stored / Free) of the
selected Mode.
Selected Mode
Press the SELECT button at
the Current mode icon to
show the information of the
connected computer.
Current mode
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5
independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a
specific computer.