Eaton 9155 - Manual (Page 2)

Reliability and efficiency have never looked so attractive.
The 9155 single-phase Uninterruptible Power System (UPS)
delivers a combination of advanced technology, user-
friendly design and low price that's absolutely unmatched
by competing products. This innovative design offers high
efficiency (90 percent or better across all load ranges), low
input current distortion (less than 5 percent total harmonic
distortion, with an active IGBT rectifier that delivers 0.99
power factor correction) and high power factor output
(0.9 PF).
With advances being made in miniaturization and processing
power and more equipment being served by dual-cord
power supplies, the challenge of protecting that power, and
doing so in a limited space, grows ever greater.
Fortunately, advances in technology have also meant
that more power protection per square foot can now be
provided. The 9155 delivers premium levels of efficiency,
reliability and flexibility, all in a sleek tower half the size of
most other units on the market today.
Features of the Eaton 9155 UPS
• A true online, double-conversion topology protects
connected equipment from all nine of the most common
power problems
• Delivers maximum power density in a compact tower
design: 12” wide and 33” deep, including batteries
• Provides more real power in less space (5,500 watts per
square foot) with a 0.9 output power factor – protecting
more equipment for every utility dollar and leaving more
room for expansion of the data center
• Patented Powerware Hot Sync ® paralleling of multiple
modules delivers extra capacity or redundancy
• Customizable output distribution provides user-specified
power outlets along with terminals for connecting hard-
wired equipment
• Microprocessor-controlled ABM ® technology significantly
increases battery life
• Provides a 0.99 input power factor and generator friendly
<5% total harmonic distortion using an active IGBT
rectifier to control the input power factor
• Ensures data and system integrity with complete
power management software for remote monitoring,
management and shutdown
• An Eaton factory limited warranty, technical support and
optional service plans provide investment protection and
peace of mind
Product Snapshot
Technology: Split-phase double-conversion
online UPS
Power Rating: 8 kVA, 10 kVA, 12 kVA and 15 kVA
at 0.9 power factor
Input Voltage: 200–240 Vac with Neutral or with
optional input isolation transformer
Output Voltage: 100/200, 110/220, 120/240 Vac 180°
phase displacement; 120/208,
127/220 Vac 120°
phase displacement
Frequency: 50/60 Hz auto-sensing
Dimensions: 32.2” H x 12” W x 32.5” D
Configuration: Small-footprint tower, black
Battery Backup: Up to 29 minutes typical, extendable up
to four hours (See battery backup charts)
Product Introduction
9155 8-15 kVA
2 EATON CORPORATION 9155 UPS