Eiki LC-XT1 - Manual (Page 11)

LC-XT1
.
This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from computers and
video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just by changing Terminal
Boards. For Terminal Boards, contact the sales dealer where you purchased the projector.
1
Remove 2 Screws on the terminal.
2
Pull out the terminal by holding the handle.
3
Replace the terminal. Insert the terminal along Guide to
fit Plug into Socket.
4
Tighten the screws to secure the terminal.