Setting-up the projector, Connecting the ac power cord, Lc-xt1 – Eiki LC-XT1 User Manual
Page 8
Advertising
LC-XT1
.
This projector uses nominal input voltages of 100-120
V
or 200-240 V AC. The projector automatically selects the correct input
voltage. It is designed to work with single-
phase power systems
having a grounded neutral
conductor. To reduce the risk of
electrical shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if
you
are not sure of the type of power supply being in use. Connect the
projector with the peripheral equipment
before turning the
projector on. (Refer to pages 12 15 for connection.)
Advertising