Eiki LC-XT1 - Manual (Page 27)

LC-XT1
.
When connecting to the computer, select a computer signal type (Digital or Analog) in INPUT SOURCE Menu.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select INPUT
SOURCE and press the SELECT button. Another dialog box
INPUT SOURCE Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the INPUT source that you want to
select, and then press the SELECT button.
When connecting to those equipment, select the type of Input
source in INPUT SOURCE Menu.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select INPUT
SOURCE and press the SELECT button. Another dialog box
INPUT SOURCE Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to “RGB”, and then press the
SELECT
button.
RGB
When connect the computer output Type (Red, Green, Blue, Horiz. Sync and Vert. Sync.)] from the computer to the A/Pr,
G/Y, B/Pb, H/HV and V jacks.