Ericsson WCDMA/HSDPA - Manual (Page 40)

Configuration and Management
Editing an Instance
To edit a port forwarding instance, click the corresponding Edit link in the
Port Forwarding section on the NAT page. The Edit Port Forwarding
Instance page is displayed.
Change one or more value(s) in the Protocol, NAT
T
Port, Server Name/IP,
or Server Port field(s) and click Apply .
2.9 File and Printer Sharing
The Ericsson W20 supports local network storage and printing. It is
possible to have two USB storage devices or a USB storage device and a
USB printer connected to the Ericsson W20 at the same time. When an
external hub is connected, the Ericsson W20 supports connection of up to
two storage devices and one printer at the same time.
When a storage device or network printer is connected to Ericsson W20,
information about the device is displayed on the File & Printer Sharing
page. If this page is open when you connect the device, a refresh of the
page is required for the new information to be displayed.
Figure 31 File & Printer Sharing page
34 1/1551-CRH 102 167 PA15 2006-08-16