Ericsson WCDMA/HSDPA - Manual (Page 41)

Configuration and Management
To access a shared file or printer from a PC on your LAN, you may need
the following information, displayed on the File & Printer Sharing page.
The name of the Ericsson W20 on the local network. Host name
The common name of all devices sharing the same
resources on the local network. Workgroup
To change the host name or workgroup, type the new name in the
corresponding field and click
Apply .
For information about setting up connections from a PC to shared files or a
network printer, see section
3.3 – “File and Printer Sharing Settings”.
2.9.1 File Sharing
The Ericsson W20 supports USB connection of up to two mass storage
devices at the same time. The included files are shared with all devices on
the LAN. All local users have full access to the shared files.
Note: If the mass storage device contains more than one partition, only
the first partition is shared.
Information about file sharing device(s) is displayed on the File & Printer
Sharing page:
The name of the shared resource on your local
network. Share name
The manufacturer name of the device. Storage device
The speed of the data transmissions between the
storage device and the Ericsson W20:
High Connection speed
Speed (480 Mbit/s) ,
Full Speed (12 Mbit/s) or
Low Speed (1,5 Mbit/s)
To give a file sharing device a specific name, type this name in the
corresponding Share name field and click
Apply .
2.9.2 Printer Sharing
The Ericsson W20 supports sharing of a network printer, connected to one
of the USB ports. Depending on the printer type, the installation may
require some specific drivers, provided by the printer manufacturer, for
installation on the client PCs.
1/1551-CRH 102 167 PA15 2006-08-16 35