Ericsson WCDMA/HSDPA - Manual (Page 60)

Trouble-Shooting
automatically (Auto) or manually change the radio channel currently
used.
• Keep the Ericsson W20 away from electrical devices that disturb the
radio frequency signals, for example microwave ovens.
• Check that the Transmit Power [dbm] on the Wireless LAN page is
configured in accordance with your requirements on wireless network
coverage. The maximum (default) value is “20”.
4.8 No Access to Shared Files or Network Printer
If you cannot access a shared storage device or network printer that is
connected to one of the USB connectors of the Ericsson W20, take the
following action to identify and solve the problem:
• Disconnect the USB device from the Ericsson W20, and then reconnect
it.
• Make sure that the PC belongs to the same workgroup as the Ericsson
W20. For instructions, see section 3.3 - File and Printer Sharing
Settings. The Ericsson W20 workgroup is displayed on the File &
Printer Sharing web page.
• If you have problems accessing a storage device, make sure that the
device is using the FAT file system. Note that only one partition is
available.
• If you have problems accessing a network printer, make sure that any
printer specific drivers are installed on the PC.
54 1/1551-CRH 102 167 PA15 2006-08-16