Eclipse - Fujitsu Ten CD5435 - Manual (Page 105)

105
Others
Changing auxiliary input sensitivity
The sensitivity of the auxiliary mode can be changed.
Press the [FUNC] button for less than one second.
The function mode is activated.
Turn the [SEL] button to select AUX Sensitivity.
The selected item is highlighted.
Press the [SEL] button.
The AUX sensitivity mode is activated.
Turn the [SEL] button to select the sensitivity mode.
Turning the button allows you to toggle through sensitivity
modes as follows:
Press the [SEL] button.
The selected settings will take effect.
Press the [RTN] button.
At this time, other adjustments can also be made in function
mode.
Press the [FUNC] or [RTN] button to exit function
mode.
Input sensitivity modes are roughly as follows:
Low 1Vrms
Mid-Low 480mVrms
Mid 240mVrms
Hi 120mVrms
[FUNC] button [SEL] button
[RTN] button
Low Mid-Low Mid Hi
CD5435.book 105 ページ ２００４年１２月１１日 土曜日 午後５時２９分