Eclipse - Fujitsu Ten CD5435 - Manual (Page 31)

31
Basic operation
SVC (Source Volume Control) Mode
You can set different volume levels for each audio mode. The
volume for the initial FM mode (default value: 40) is used as a
reference for storing the differences in volume that have been set
for each audio mode. When SVC is set, the volume level can
change as shown in the example settings in the table below.
Setting examples:
*: The volume levels can be set to a maximum of 80 and a
minimum of 0. If you try to go past the maximum or minimum
volume level, the level will not change. For the CD changer, SVC
adjusts the volume using the setting value for the CD player.
Audio mode FM AM CD
Default value
(Volume level) Reference
(40)
0
(40)
0
(40)
SVC setting
(Volume level) Reference
(40)
SVC setting
value
+15 (55)
SVC setting
value
-10 (30)
When volume level in
FM mode is adjusted
from 40 to 45
45 55 ➔ 60 30 ➔ 35
When volume level in
CD mode is adjusted
from 35 to 60
45 ➔ 70 60 ➔ 80* 60
When volume level in
AM mode is adjusted
from 80 to 20
70 ➔ 5 20 60 ➔ 0*
[AUDIO CONTROL] button
CD5435.book 31 ページ ２００４年１２月１１日 土曜日 午後５時２９分