Eclipse - Fujitsu Ten CD5435 - Manual (Page 33)

33
Basic operation
Recording user presets for the equalizer
The adjustment values for BASS, MIDDLE and TREBLE settings made in
the audio control mode can be stored. The stored adjustment values can be
called by changing the equalizer mode. For detail, see "Changing the
equalizer mode" on page 33.
Press the [AUDIO CONTROL] button for more than one
second.
The adjusted values are stored.
Changing the equalizer mode
EQ (equalizer) mode can be used to adjust the frequency of the audio
channels being played back in accordance with the genre and instruments
of the music being played. Apart from four equalizer modes, this deck offers
the audio adjustment mode in which you can store set BASS, MIDDLE, and
TREBLE adjustment values, and the CUSTOM MODE in which and you can
apply these adjustment values.
Press the [SOUND] button for less than one second.
Each time the button is pressed, the equalizer mode changes in the
following order.
[SOUND] button
[AUDIO CONTROL] button
DEFEAT (equalizer OFF)
POWER (bass tones emphasized)
SHARP (high tones emphasized)
VOCAL (mid tones emphasized)
CUSTOM (memorized user-preset values for the equalizer)
CD5435.book 33 ページ ２００４年１２月１１日 土曜日 午後５時２９分