Various functions, Lighting, Input selection – Elmo HV-7000SX User Manual

Page 21

Advertising
background image

20

6. VARIOUS FUNCTIONS

Lighting

The upper lighting unit for presenting material such as printed

matter and 3-D object, and the baselight for presenting
transparent material, such as slide, and negative film, are built
in the Presenter.
Depending on the material to be presented, press the button
[UPPER] or [BASE] on the front operation panel or wireless
remote control. The indication lamp will blink for a few
seconds, and then the fluorescent lamp will light up.
To turn OFF the lamp, press the button for the respective
lamp.
It has been so set before shipment that the lighting unit lights
up when the power supply is turned ON.

Notes:

·

It is impossible to have the upper lighting unit and
the baselight lit up together.

·

When the lightness of the material surface is not
sufficiently high or a 3-D object is presented, a
sharp image with good color rendering can be
obtained with the upper lighting unit.

·

To reduce glare, attach enclosed stickers, as
shown, to the outside ends, of toplights.

Input selection

The respective images from two different AV sources, such as

PC and ELMO Presenters [HD-80XG], can be alternately
presented on the Monitor by simply selecting the AV source
by pressing the input selection button without changing cable

connections.
Press the input selection button [RGB1] / [RGB2] on the
front operation panel or wireless remote control.

When the input is selected, the signal is outputted as shown in

the following page.

Front operation panel

Wireless remote control

Front operation panel

Wireless remote control

Advertising