Elmo HV-7000SX - Manual (Page 33)

32
Table of the communication commands
• When the pointer is ON
The pointer moves.
• When the image enlargement is ON
The enlarged image moves.
1: To the right side.
2: To the left side.
3: To the upper side.
4: To the lower side.
5: To the lower left.
6: To the upper right.
7: To the upper left.
8: To the lower right.
Function Command Parameter Data Comments
Auto Focus 0
+ (NEAR)
– (FAR)
0 (STOP)
+ (TELE)
– (WIDE)
0 (STOP)
0 (OFF)
1 (BASE)
2 (UPPER)
0 (POSI)
1 (NEGA)
0 (OFF)
1 (ON)
0 (STOP)
1 ( )
2 ( )
3 ( )
4 ( )
5 ( )
6 ( )
7 ( )
8 ( )
0 (COLOR)
1 (B&W)
+ (OPEN)
– (CLOSE)
0 (STOP)
1 (AUTO)
0 (MAIN)
1 (RGB1)
2 (RGB2)
AF
FO
ZO
IR
PL
AV
NP
CB
PO
PM
Command to execute the one-step auto focus.
Focus
adjustment Command to adjust the focus.
Zoom
adjustment Command to adjust the Zoom.
Iris adjustment Command to adjust the Iris.
Lighting
selection Command to select the Lighting.
Input selection Command to select the Input.
Posi/Nega
conversion Command to convert Posi/Nega.
Color/B&W
selection Command to select Color/B&W.
Pointer display Command to turn ON/OFF the Pointer display.
Enlarged
image
movement
0 (OFF)
1 (ON)
0 (OFF)
1 (ON)
MA
FZ
Electronic
Magnification
Command to enlarge the image to double the area around the pointer
position.
Pause Command to pause the image.
0 (OFF)
1 (ON) LL Local lockout Command to invalidate the switches on the front operation panel and
wireless remote control.