Elmo HV-7000SX User Manual
Page 31
30
Function
The sound volume from the microphone jack is adjusted. When the set
menu is displayed for the first time, the previous volume setting is
maintained. When this icon is clicked with the left button of the mouse
then, the volume bar appears. Click the direction buttons to adjust the
sound volume with the left button of the mouse. When the volume
adjustment icon is clicked with the left button of the mouse again, the
volume bar disappears.
The volume has been set to 41 before shipment.
The image enhancer (contour) is switched. When the set menu is
displayed for the first time, the image enhancer is ON. When this icon is
clicked with the left button of the mouse then, the icon changes to set the
image enhancer to OFF.
Note: This function is not effective for the NTSC/PAL monitor.
The gamma correction (1.0/0.6) is switched. When the set menu is
displayed for the first time, the gamma correction setting is maintained.
The gamma has been set to OFF (1.0) before shipment.
The down converter output type (NTSC/PAL) is switched. When the set
menu is displayed for the first time, the down converter output type is
maintained.
The down converter output type has been set to NTSC before shipment.
The control mode for the main body from external equipment (USB
jack/RS-232C jack) is switched. When the set menu is displayed for the
first time, the control mode for the main body from external equipment is
maintained.
The control mode for the main body from external equipment has been set
to USB before shipment.
The present status and adjusted values are saved. The status of lighting
unit ON/OFF, resolution, gamma, NTSC/PAL, USB/RS-232C and the
value of microphone volume, RED gain and BLUE gain are saved.
The adjusted values are reset to the values set before shipment. However,
the current selections of the resolution, NTSC/PAL and USB/RS-232C
remain unchanged.
Icon
Name
Volume adjustment
(0 ~ 63)
Aperture selection
Gamma selection
ON/OFF
NTSC/PAL selection
NTSC/PAL
USB/RS-232C
selection
USB/RS-232C
Status saving
Initialization