Extreme Networks Px Series - Manual (Page 21)

Px Series Application Switch Installation and Configuration Guide 2-3
Overview of the SummitPx1 Application Switch
For more information on connecting and configuring these ports, see “Setting Up
Console Communication” on page 2-6.
SummitPx1 Application Switch Rear View
Figure 2-2 shows the SummitPx1 application switch rear view.
Figure 2-2: SummitPx1 application switch rear view
• Power Socket
The SummitPx1 automatically adjusts to the supply voltage. The power supply
operates down to 90 VAC. The fuse is suitable for both 110 VAC and 220-240 VAC
operation.
• Serial Number
Use the serial number for fault-reporting purposes.
• MAC Address
A label shows the unique Ethernet MAC addresses assigned to this device.
Table 2-2: DB-9 Adapter Pinouts
TO: DB-9
FROM: RJ45
SHELL
Signal Description
Pin 6 Pin 1 DSR
Pin 8 Pin 2 CTS
Pin 2 Pin 3 RD
Pin 5 Pin 4 SG
NC Pin 5 --
Pin 3 Pin 6 TD
Pin 7 Pin 7 RTS
Pin 4 Pin 8 DTR
WS_010
Power socket and fuse