Epson 850N - Manual (Page 123)

Using the Ethernet Card
6-21
Setting Up for HP-UX Systems
You can use either ftp or rlp (lpr) to print from an HP-UX
system. You use the SAM utility to set up both. Before starting
SAM, enter a unique IP address and host name in the /etc/hosts
file. See “Setting Up the Printer as a Network Device” on
page 6-13 for information on assigning an IP address and host
name.
RLP setup
On the printer definition page of SAM, use the following
settings:
To print, use either rlp or the following:
lpd -d <printer name>
Using FTP with HP-UX
Follow these steps to use ftp with HP-UX:
1. Type the following:
lpshut
lpadmin -p<spooler name> -m<modelscript> -v/dev/
null
accept <spooler name> enable <spooler name>
lpsched
Printer Name Any name
Remote System Name Use name in /etc/hosts
Remote Printer Name Nothing or ‘lps,’ ‘lpaf,’ etc, if
using filters
Remote Council Model /bin/true
Remote Status Model /bin/true
Make System Default Enter as appropriate
Printer Class Nothing
Restrict Council Nothing
Remote Printer on BSD system Nothing
basket-6.fm Page 21 Wednesday, May 13, 1998 4:37 PM