Epson 850N - Manual (Page 156)

Using Floppy Diskettes
A-7
9. If you’re using NetWare, set the number of hops (0 to 15)
and click Next .
Number of hops: _______
10. Check the current settings and click Next to install the
software. When the installer prompts you, insert the second
diskette.
11. When you see the Setup Complete screen, select No and
click Finish .
12. Insert Status Monitor 2 for EPSON Stylus COLOR 850,
diskette 1 in your drive.
13. Follow steps 2 to 10, using the same settings you used in
those steps.
14. When the Setup Complete screen appears, select Yes and
click Finish .
15. After you restart your computer, right-click the green
background monitoring icon in your Startup group on the
taskbar. Click
stop monitoring now . This step turns off
background monitoring, which may interfere with EPSON
Net! when you configure the card. (See page 4-7 to turn on
background monitoring.)
Caution:
If you have dial-up
routers in a NetWare
environment, they may
automatically dial up the
next hop and you may
be charged for the line
connection depending
on the number of hops
you set. To prevent this
and to keep network
traffic to a minimum,
set hops carefully.
Note:
If you install Status
Monitor 2 on additional
workstations, or you are
not using EPSON Net!
you do not have to turn off
background monitoring.
You should limit the
number of systems that
monitor the printer,
however, to prevent
network traffic problems.
basket-a.fm Page 7 Wednesday, May 13, 1998 4:09 PM