Epson 850N - Manual (Page 79)

Managing Print Jobs
4-8
4. Select Monitor from restart (to begin background
monitoring on the printer after your next system restart),
Monitor now (to begin background monitoring right
away), or Stop monitoring now (to stop background
monitoring).
5. Now set your monitoring preferences for the printer as
described on page 4-3.
Changing Status Monitor 2 Settings
You can run through the Setup program and change your
settings without uninstalling and reinstalling Status Monitor 2.
This procedure allows you to change any of the following
settings:
◗ number of hops
◗ types of printers you can monitor
◗ EPSON TCP/IP printing
You can also run this program any time you install the printer
software and Status Monitor 2 is unable to find the printer.
Follow these steps to change your settings:
1. In Windows Explorer or My Computer, find the folder
where your EPSON Status Monitor 2 files are located
(ESM2 is the default) and double-click
Setup.exe .
2. Close any open programs and click Next .
3. If you are using Windows 95 and you have TCP/IP
installed, you see a screen asking you if you want to enable
EPSON TCP/IP printing. Select
Yes if you want to print
with TCP/IP, and then click Next . If you are printing with
Novell NetWare, select No .
TCP/IP Printing: Yes_______ No_______
Note:
You may not see screens
for all the steps here,
depending on your
computer’s configuration.
Write down your settings
in the spaces provided.
You can refer to them if
multiple systems are
monitoring the printer.
basket-4.fm Page 8 Wednesday, May 13, 1998 2:36 PM