Enterasys Networks 700 - Manual (Page 112)

Statistics
3-6 RMON Statistics
3. Click on the Accum option button; after the completion of the current polling
cycle plus two more polling cycles, the screen will display a fresh cumulative
count of statistics. Note that making this selection does
not clear device
counters; you can still re-select Total for the total count since the device was
last initialized.
Switching the statistics displays among Total, Delta, and Accum does not effect
the displayed peak values, as peak values are always Delta values.
To temporarily freeze the statistics display, select the Freeze Stats option; in this
mode, statistics will continue to be collected, but the display will not update. To
resume normal updates, click again to de-select the freeze option.
Printing Statistics
The Print button located at the bottom of the Statistics window allows you to
print the current snapshot of statistical data. When you select Print, a standard
Windows Print window like the sample shown in
Figure 3-2 will appear.
Figure 3-2. Standard Print Window
Adjust printer settings as required, then click OK.
NOTE
If you reset your device, you must first close, then re-open the Statistics window to refresh
peak values.