Enterasys Networks 700 - Manual (Page 36)

The MultiSwitch 700 Device View
2-16 Viewing Device Information
Figure 2-5. The MultiSwitch 700 Module Backplane Device View
From the Backplane
View you can display
the device interfaces
with respect to their
bridging status or
their MIB II Interface
status. The currently
selected Port Display
Form is shown in the
label above the
interfaces.
Below the Port
Display Form label,
the interfaces appear
according to the
currently selected
Display Form. In the
Bridge display form,
you can access
management options
for the individual
interfaces.
To change the display form
between Bridge and
Interface, click on the label
and select the desired
display form from the
resulting menu. Bridge is
the default display form.
When the display form is in Bridge mode,
clicking on an interface will result in a
menu, offering various options applicable
to the selected backplane interface. For
information on enabling or disabling the
interface using the Enable... or Disable...
options, see
Enabling or Disabling a
Backplane Interface , on page 2-18 . For
details on the remaining menu options,
refer to their entries in
The Port Menus ,
on page 2-11 .