Enterasys Networks 700 - Manual (Page 158)

FDDI Management
5-14 Configuring FDDI Frame Translation Settings
Setting the FDDI Statistics Poll Rate
To set the FDDI Statistics poll rate:
1. Click on the clock symbol ( ) next to the Poll Rate (sec) text box. The New
Timer Interval text box, Figure 5-7 , will appear.
Figure 5-7. New Timer Interval Text Box
2. Using the mouse, click to highlight the hour field in the New Timer Interval text
box.
3. Using the arrow keys to the right of the text box, scroll to change the hour, as
desired. Notice that the time is given in a 24-hour hh:mm:ss format.
4. Using steps 2 and 3, continue to change the minutes and seconds fields, as
desired.
5. Click on OK when you are finished entering new information. The new Poll
Rate you have set is now entered.
The FDDI Statistics window will refresh, and the new time interval will take effect
immediately.
Configuring FDDI Frame Translation Settings
The DELHF-UA interface must be configured to translate packets from an FDDI
frame format to an Ethernet frame format (and vice versa) when bridging packets
between FDDI and Ethernet networks. The Frame Translation window lets you
set the parameters for frame translation.
To access the FDDI Translation window ( Figure 5-8 ):
1. In the Device View window, click on FDDI to display the FDDI menu.
2. Select Frame Translation; the Frame Translation window, as shown in
Figure 5-8 , will appear.