Eiki LC-SD15 - Manual (Page 20)

20
Basic Operation
POWER LAMP
REPLACE
WARNING
INPUT
MENU
ON - OFF
SELECT
V O L U M E – V O L U M E +
Top Control
Menu bar
Pointer
(red frame)
Menu icon
Item data
Press the Point 7 8 buttons
to adjust the value.
SELECT
button
Pointer (red frame)
Press the Point d button to
move the pointer.
Item
How to Operate the On-Screen Menu
MENU button
SELECT button
POINT button
(outer ring)
On-Screen Menu
Quit
Exit this menu.
The projector can be adjusted or set via the On-Screen Menu.
Refer to the following pages regarding each adjustment and
setting procedure.
Press the Point 7 8 buttons to select a Menu icon to adjust.
Press the Point ed buttons to select an item to adjust.
Press the SELECT button to show the item data. Press the
Point
7 8 buttons to adjust the data. Refer to the following
pages for each adjustment.
Press the MENU button to display the On-Screen Menu.
✔
Note:
• The selected item is not active until the SELECT button is pressed.
1
2
3
SELECT button
POINT buttons
Remote Control
MENU button