Eiki LC-SD15 - Manual (Page 44)

44
This function resets the lamp replacement counter. When
replacing the projection lamp, reset the lamp replacement counter
with this function. See page 49 for operation.
Lamp counter reset
Factory default
This function restores all setting values except for the user logo,
PIN code lock, Logo PIN code lock and the lamp counter to the
factory default settings.
Select Factory default and this
box appears. Select [Yes], and
the next box appears.
Factory default
Select [Yes] to
activate it.
This function provides the following alternatives in the cooling
fans' operation after turning off the projector. (p18)
L1 . . . . . . . . normal operation
L2 . . . . . . . . slower and lower-sound than the normal operation
(L1), but it takes longer to cool the projector down.
Fan
Fan
Setting