Eiki LC-SD15 - Manual (Page 33)

33
Video Input
Press the MENU button to display the On-Screen Menu.
Press the Point
7 8 buttons to move the red frame pointer
to the AV System Menu icon.
1
Video System Selection
AV System Menu (Video or S-Video)
AV System Menu (Component)
Press the Point d button to move the red arrow pointer to
the desired system and then press the SELECT button.
2
If the projector cannot reproduce a proper video image, select a
specific broadcast signal format among PAL, SECAM, NTSC,
NTSC4.43, PAL-M, and PAL-N.
Move the pointer to a system
and press the SELECT button. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
The projector automatically detects incoming video signal and
adjusts itself to optimize its performance.
If the projector cannot reproduce a proper video image, select a
specific component video signal format among 480i, 575i, 480p,
575p, 720p, 1035i, and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video or S-Video
Component
The projector automatically detects an incoming video system and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
Auto
AV System Menu icon
Selected system is displayed.
Move the pointer to a system
and press the SELECT button.
AV System Menu icon
Selected system is displayed.
Video Input