Humax COMBO-9000 - Manual (Page 26)

3. Installation Wizard
GB25
User’s Manual
3.3 Terrestrial Channel Search
You can search the terrestrial channels.
1. Select Automatic Channel Numbering using the /
button and press the OK or button to select Enable/
Disable.
Select Next and press the OK button to search the
terrestrial channels
2. During the channel search, the cursor is located at Stop.
Therefore, if you press the OK button during the search, the
search will stop and the channels found until then will be
displayed.
3. If the search does not fi nd any channels, then press the OK
button to access the installation menu to search for the
channels again. Please make sure that you have connected your aerial correctly.
4. You can delete unwanted channels from the found channels. Select the channels to delete and press
the OK button. Then select Delete and press the OK button. To delete all channels, select Select All to
select all channels, select Delete and press the OK button.
5. After completing the channel search and deleting unwanted channels, select Save and press the OK
button to save the changes.
3.4 Default Channel List
Select Default Channel List using the / button and press the OK or button to store the default
satellite channels and move to the time setting screen.
3.5 Number of Satellite
You can select the number of satellite.
1. Select the number of satellite using the / button and
press the OK or button.
2. Select Skip using / button and press the OK or
button to skip to the next.