Humax COMBO-9000 - Manual (Page 63)

GB62
User’s Manual
7. Installation
7.5 Default Setting
Tip:
•
The default password is 0000.
• If you have forgotten your password, please contact your local product distributor.
Default Setting enables you to restore the product to the factory default.
Warning: Please note that once you perform Default Setting, all data such as antenna setting
information, channel list, and all user confi gured data will be deleted.
1. Press the MENU button.
2. Select Installation using the / button and press the OK
or button.
3. Select Default Setting using the / button and press the
OK or button.
4. Select Yes and press the OK button to restore all setting to
factory default. To return to the previous menu, select No
and press the OK or EXIT button.
5. You will be prompted to enter your password again before
starting to load default setting. Enter the password to
proceed.
6. When default setting is completed, installation wizard pops up automatically. For detailed information
about installation wizard, refer to Chapter 3. Installation Wizard.