Humax COMBO-9000 - Manual (Page 27)

GB26
User’s Manual
3. Installation Wizard
3.6 Antenna Setting
You can set the antenna and LNB information for channel search.
1. Select Satellite using the / button and press the OK or
button to select an option.
2. Select LNB Frequency using the / button and press
the OK or button to select an option. If the required
value does not exist, select User Defi ne and enter the LNB
frequency directly using the NUMERIC(0-9) buttons.
Note: If you select Universal, the 22kHz Tone value is set to
Disabled.
3. Select 22kHz Tone/DiSEqC Input using the / button
and press the OK or button to select an option.
3.7 Search Type
You can select the search type.
Select Scrambled Type/Channel Type using the / button
and press the OK or button to select an option.