HONDA EM7000is - Manual (Page 31)

29
OPERATION
Starting the engine with remote control (optional part)
ON
O O F F F F
OFF
ENGINE SWITCH
REMOTE
PILOT LAMP
FUEL VALVE
START BUTTON
Determine the voltage requirements and adjust the voltage selector
switch, as needed.
Turn the fuel valve to the ON position.
Turn the engine switch to the REMOTE (far left) position.
Press and hold the start button until the engine pilot lamp
illuminates. The start button will automatically be disabled after the
engine starts.
Using the electric starter for more than 5 seconds at a time will
overheat the starter motor and can damage it.
If the engine fails to start within 5 seconds, release the button, and
wait at least 10 seconds before operating the starter again.
1.
2.
3.
4.
05/04/25 09:42:09 31Z11600_030