HONDA EM7000is - Manual (Page 92)

90
OPTIONAL PARTS
CABLE TIE
REMOTE
CONTROL CABLE
REMOTE CONTROL CABLE
REMOTE CONTROL BOX
MAINTENANCE COVER GROMMET
PLUG
Pass the remote control cable through the supplied wire grommet
and fit the grommet into the maintenance cover knockout.
Plug the remote control cable into the 6-pin connector.
Install the maintenance cover and tighten the cover screw.
To avoid accidentally unplugging the remote control cable, secure
the cable to the generator frame with a cable tie as shown.
When the remote control is not
being used, replace the plug on the
connector.
Never operate the generator
without the maintenance cover in
place, as poor engine and generator
performance will result.
7.
4.
5.
6.
05/04/25 09:49:56 31Z11600_091