HONDA EM7000is - Manual (Page 69)

67
TAKING CARE OF UNEXPECTED PROBLEMS
GENERATOR PROBLEMS
No Power at the
AC Receptacles Possible Cause Correction
Check AC load.
Stop and restart
the engine.
Check the cooling
air inlet. Stop and
restart the engine.
Check AC load and
reset circuit
protector(s) (p. 14).
Replace or repair
power tool or
appliance.
Stop and restart
the engine.
Replace or repair
faulty components
as necessary. Check output
and overload
indicator.
Check circuit
protectors.
Check the power
tool or appliance
at a known,
good AC power
source.
Take generator
to an authorized
Honda servicing
dealer, or refer
to shop manual.
Output indicator is
OFF, and overload
indicator is ON.
Circuit protector(s)
tripped.
Faulty power tool
or appliance.
Faulty generator.
1.
2.
3.
4.
05/04/25 09:46:38 31Z11600_068