Hi-Touch Imaging Technologies PHOTOSHUTTLE 640PS - Manual (Page 10)

9
Chapter 2 Quick Installation
2-1
Standalone Installation (640PS)
1. Plug the controller cable into the slot in the rear of the printer
2. Please make sure the USB cable is not connected to PC
3. Turn on the power.
4. The main page of the LCD will appear, and ready for the further operation.
Note: If the USB cable is connected to PC, the printer will be in PC Mode
(Shown on the LCD), the controller function will be disable at
the same time.
2-2
Standalone Operation Flow (640PS)
1. Introduction of the Controller
The HiTi Photo Printer 640PS Controller provide a full-function printing
interface, the details are as follows:
-1.6 inches TFT LCD: Totally 60K pixels and full color (24bit) performance on
the panel, all the images preview, editing and printing related information is
accessible through the OSD (On Screen Display) design.
LCD
ESC
MENU
OK
Arrow Key
EDIT
PRINT