Hi-Touch Imaging Technologies PHOTOSHUTTLE 640PS - Manual (Page 15)

14
-Firmware Update
Insert the memory card with the new firmware
Press OK to reconfirm and start updating
Note:
Please make sure your memory card is formatted and completely empty
before saving the new firmware into the card . Any related information
about new firmware, please go to
www.hi-ti.com
-Printer Setting
Position calibration
Put a 4x4 sticker into your paper cassette
Press PRINT to get the Position Calibrating format on the sticker
According to your print out, you must fill in the number of PART A and
PART B which match the sticker blade cutting line, in order to adjust the
horizontal and vertical margin.
Printout Setting
Brightness: Right for increase and Left for decrease
Contrast: Right increase and Left for decrease
Color R/G: Right for more red tone and Left for more green tone
Color B/Y: Right for more blue tone and Left for more yellow tone
Default: Return to original factory setting
OK: Save the change in Printout Setting and back to Printer Setting
Matte effect: Select to turn on/off the matte effect
Date print: Select to turn on/off the date printing on the photo (support on
EXIF file format)
OK: Save the change in Printer Setting and back to upper layer
-LCD Adjustment
Select functions between Brightness, Contrast, Color R/G, Color B/Y
Press Left and Right arrow keys to decrease or increase the value
Press Ok to save the setting and back to the upper layer
-Language
Press Up and Down arrow keys to select language for operation interface
-Clean Mode
Select clean mode to start cleaning process