HP 2500 Series - Manual (Page 100)

98 Problem solving and maintenance ENWW
Your document is not
printing with New York,
Geneva, or Monaco fonts. The printer might be substituting
fonts. Select Options in the Page Setup dialog box to clear
substituted fonts.
USB Problems
You are unable to print
from a third-party USB
card. This error occurs when the software
for USB printers is not installed. When adding a third-party USB card, you might need the
Apple USB Adapter Card Support software. The most current
version of this software is available from the Apple website.
When connected using a
USB cable, the printer
does not appear in the
Macintosh Chooser after
the driver is selected. This problem is caused by either a
software or hardware component. Software troubleshooting
● Check that your Macintosh supports USB.
● Verify if your Macintosh has Mac OS 8.6 or later.
● Ensure that your Macintosh has the appropriate USB
software from Apple.
Note: The iMac and Blue G3 desktop Macintosh systems meet
all the requirements to connect to a USB device.
Hardware troubleshooting
● Check that the printer is turned on.
● Verify that the USB cable is properly connected.
● Check that you are using the appropriate high-speed USB
cable.
● Ensure that there are not too many USB devices drawing
power from the chain. Disconnect all devices from the
chain and connect the cable directly to the USB port on the
host computer.
● Check to see if more than two nonpowered USB hubs are
connected in a row on the chain. Disconnect all devices
from the chain and connect the cable directly to the USB
port on the host computer.
Note: The iMac keyboard is a nonpowered USB hub.
Symptom Possible Cause Solution